YOU MAY EXPERIENCE DELAYS IN SHIPPING AT ANY TIME DUE TO THE WORLDWIDE SEMICONDUCTOR SHORTAGE.
Please turn off compatibility mode to ensure this site displays properly. For instructions to complete this action, please click
Technical Product Support
Design-In Tools Store
STP DDR5 DIMM Test Card
STP DDR5 Test Card with programmed FPGAs used to test connectivity of the CPU DDR bus as part of the STP solution. To be used with STP SPR CPU test card.
Dimensions 1.838” x 5.25”
Programmable features from the test script
- Test frequency 50Kbs to 200Mbs
Pattern length 10 bit to 1M bit
Pattern density PRBS4 to PRBS15
Developed by DEO-PDE with no restricted Intel IP and can be used worldwide. (CNDA for ITP HW and SW)
Not dependent on BSDL or BIOS, Test Card is NOT electrically a DDR5 compliant board.
Uses ITP/XDP white cover SW which is compatible with Intel ITP/XDP debug environments. (No restricted Intel IP)
Low cost JTAG controller available to run STP Flyswatter2, plus ARM20MIPI60 JTAG kit available through
STP test boards are IEEE 1149.1 compatible with custom OPCODES for STP features (PRBS, ADC measurements and straps)
DDR5 Extender cards can be used with the STP DDR5 Test card to extend the life. NOTE that because of individual gold finger measurements on power and ground pins, DDR5 Extender cards MUST be one to one mapping and NOT have power and ground pins tied to Extender power and ground planes.
Log in for more information.
(Your shopping cart is empty)